One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
Showing posts with label restoration. Show all posts
Showing posts with label restoration. Show all posts
Friday, January 18, 2008
Water Damaged Clothing Cleaning Methods
One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
Replacing Molded, Wet Carpet
For a homeowner there is nothing more unsightly then mold. Even worse, still, is mold growing on your carpet. The first thing one usually decides to do upon discovering mold is to have it thoroughly cleaned. However, this can be far more difficult than it actually sounds. One of the biggest problems you can face may be that the mold isn’t simply on your carpet. It may also be on the padding beneath the carpet, and this could just cause even more damage than the original carpet. And if this is the case, the whole carpet should be removed. The padding should also be removed and thrown away.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Protecting Your Personal Property From Mold
It is well known that there is no such thing as a “mold free” environment. It is in the air we breathe, on our furniture, on our clothes, and definitely in our homes. It is simply a matter of whether or not the mold actually starts to grow on our property that determines if there is a problem. Mold likes to grow in wet environments, so wet kitchen floors are potential breeding grounds, as well as un-dried dishes in your kitchen.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Moldy Fabric Cleaning Methods Revealed
There is hardly a person in the world that hasn’t gone through their wardrobe and discovered that one favorite shirt of theirs from their younger days. And then the moment is ruined upon the discovery of a fuzzy substance on the shirt. If you found this shirt in the back of your closet, then you should go wash your hands, because the shirt has been infected with mold and touching mold spores with your bare hands can be very hazardous for your health. There are several medical problems that could arise from contact with mold. Some of these problems are skin rashes, allergic reactions, runny noses, and the like.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Mold Can Destroy Citrus Crops Quickly
Anyone who works with citrus crops knows that they can take a very long time to grow and cultivate. But, perhaps even more frustrating than waiting on the crops to have to grow and ripen are the various molds and fungi that could afflict the crops. The two most prominent molds that affect a citrus crop post-harvest are blue mold, and green mold. These two are caused by the single mold Penicillium digitatum. All citrus fruit growing regions have this mold and it is most certainly a serious threat to the crops.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Hurricanes And Water Safety Made Simple And Easy
If there is a hurricane heading to your area, then it is most important that you make preparations, incase you decide to simply wait the hurricane out. Arguably the most important thing that you can do is to make sure that you have a sizeable bottled water supply in your home. It is important that you make sure that the water supply is proportionate to the number of people dwelling at your house, as there must be enough water for the duration of the storm. It is critical that you have clean drinking water during the storm. The water from the sea and sewer system may have affected the water in your tap, so you should never assume that the water coming out of your faucet is clean. You should not drink anything but bottled water during a hurricane. This contaminated water could sicken your family or guests and even cause death in the worst case. You should make sure that there is at least one gallon of water for one person to drink a day. Water purification tablets and chlorinated bleach come highly recommended, as they can be used to clean water in most situations. It is important that you let the treated water set for at least 30 minutes before you drink it.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Subscribe to:
Posts (Atom)
