A mold that plagues some homes and should not be underestimated is Meruliporia incrassate. This is a fungus that causes a severe amount of rotting in the wooden parts of your home and this is extremely difficult to get rid of, since is has the ability to collect and retain water over a longer period of time than other molds. It typically extends itself through not only the wood, but other porous materials that make up your home and find the water that it needs in order to stay alive.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
Saturday, January 26, 2008
What to Throw Out After a Flood
After a flood has made its way through your home, you are going to be doing a lot of wondering about what you need to try and repair and what needs to be just thrown away. There are a number of items in your house that are going to be better off thrown out instead of you trying to repair them or refurbish them in any way.
One thing that is going to need to be definitely thrown away is food. Any foods in your home will need to be thrown out, including everything in the refrigerator and in the cabinets, even if they did not come into contact with the water directly. If the home was under water for more than 48 hours, the humidity in the home will have gotten so high that it is likely that they have started to mold or at the very least, have become contaminated.
Items such as bedding that is full of padding, like pillows, will most likely need to be thrown out. These thick items are difficult to disinfect entirely and dry out. Not only bacteria have likely contaminated these items, but sewage and other chemicals, as well. Trying to clean these items is probably going to be more trouble than it is worth in the long run and simply purchasing new bedding may be more efficient.
Children’s toys that are porous such as stuffed animals will need to be thrown out. Items contaminated with sewage and chemicals like this or have been contaminated with mold will need to be thrown away because getting them completely safe to be played with again is very difficult. The padding inside these items soaking up soil, sewage, and other chemicals is what makes them so difficult to clean. Plastic toys can be disinfected with cleaners such as Lysol or bleach.
Wooden furniture may become molded if the flood water and the chemicals that it may contain penetrate the finish. These will need to be disinfected and refinished after the flood is over.
Upholstered furniture will usually need to be thrown out if it has been sitting in flood water for more than 24 hours. Soil and sewage will penetrate the outer fabric after a while and be extremely difficult to clean. Much like carpet padding, it will need to be thrown out. Upholstered furniture can be re-upholstered, but this usually comes at a great expense and it is often much easier to just buy a new couch or chair.
One thing that is going to need to be definitely thrown away is food. Any foods in your home will need to be thrown out, including everything in the refrigerator and in the cabinets, even if they did not come into contact with the water directly. If the home was under water for more than 48 hours, the humidity in the home will have gotten so high that it is likely that they have started to mold or at the very least, have become contaminated.
Items such as bedding that is full of padding, like pillows, will most likely need to be thrown out. These thick items are difficult to disinfect entirely and dry out. Not only bacteria have likely contaminated these items, but sewage and other chemicals, as well. Trying to clean these items is probably going to be more trouble than it is worth in the long run and simply purchasing new bedding may be more efficient.
Children’s toys that are porous such as stuffed animals will need to be thrown out. Items contaminated with sewage and chemicals like this or have been contaminated with mold will need to be thrown away because getting them completely safe to be played with again is very difficult. The padding inside these items soaking up soil, sewage, and other chemicals is what makes them so difficult to clean. Plastic toys can be disinfected with cleaners such as Lysol or bleach.
Wooden furniture may become molded if the flood water and the chemicals that it may contain penetrate the finish. These will need to be disinfected and refinished after the flood is over.
Upholstered furniture will usually need to be thrown out if it has been sitting in flood water for more than 24 hours. Soil and sewage will penetrate the outer fabric after a while and be extremely difficult to clean. Much like carpet padding, it will need to be thrown out. Upholstered furniture can be re-upholstered, but this usually comes at a great expense and it is often much easier to just buy a new couch or chair.
Well Water Sanitation
There are thousands of people in the United States that have to rely on well water instead of a city water system for the water that they both bathe and drink in. While there are some filters that you can have installed onto your well to rid the water supply of rust, soil, or other particle debris, there are not really any filters currently that disinfect your water and rid it of bacteria that may be growing in it, such as E. coli. Cleaning the water yourself manually, though, is always an option by simply using unscented chlorine bleach.
Most people chlorinate their well water to disinfect it after some kind of repair has been done, after the well has not been utilized in a long time (like with a summer or winter home), to get rid of bacteria living in it, or to remove hydrogen sulfide buildup.
Before you start the process of cleaning your well water, you need to get enough water put back in jugs or buckets in your house to last the occupants of it for at least the next 24 hours. The water system in your home should not be used during this 24 hours period at all.
You need to use an unscented bleach for this job. This will have around 3 to 5 percent of sodium chlorite. You will need to use a different amount in your well depending on how deep and how wide your well is. If the well is under 50 feet in depth and about 6 inches in diameter, you will need to use between 3 and 4 liters of bleach.
Your water supply should not smell like chlorine after the 24 hours is up. If it does, you will need to wait longer for the chlorine to be flushed from the system. You should not drink the water until it no longer smells like bleach.
If you notice a significant change for the better in the quality of your water supply after you finish this process, but the issue returns in the next couple of weeks or longer, the process will need to be repeated and you should probably add a bit more bleach to the water. Repeat the process until the results last or seek help from a professional. It will be worth it in the long run when you do not have to worry about the safety of your home’s water supply.
Most people chlorinate their well water to disinfect it after some kind of repair has been done, after the well has not been utilized in a long time (like with a summer or winter home), to get rid of bacteria living in it, or to remove hydrogen sulfide buildup.
Before you start the process of cleaning your well water, you need to get enough water put back in jugs or buckets in your house to last the occupants of it for at least the next 24 hours. The water system in your home should not be used during this 24 hours period at all.
You need to use an unscented bleach for this job. This will have around 3 to 5 percent of sodium chlorite. You will need to use a different amount in your well depending on how deep and how wide your well is. If the well is under 50 feet in depth and about 6 inches in diameter, you will need to use between 3 and 4 liters of bleach.
Your water supply should not smell like chlorine after the 24 hours is up. If it does, you will need to wait longer for the chlorine to be flushed from the system. You should not drink the water until it no longer smells like bleach.
If you notice a significant change for the better in the quality of your water supply after you finish this process, but the issue returns in the next couple of weeks or longer, the process will need to be repeated and you should probably add a bit more bleach to the water. Repeat the process until the results last or seek help from a professional. It will be worth it in the long run when you do not have to worry about the safety of your home’s water supply.
The Water Junctions of Your Bathroom
The prevention of water damage in most areas of your home is fairly easy, it just usually takes a bit of diligence on your part to make sure that the rest of your household helps you in this task. Preventing this damage from occurring is typically much, much easier to accomplish and cheaper than having to repair the damage after it has happened. Whether it is the discoloration of drywall from steam, damaged floorboards due to cracked tiles, or replacing vanities because of leaks under the sink, the cost of actually preventing this damage from happening usually hovers around zero. Since the bathroom is one of the most valuable areas of your home, you should do what you can to safeguard it.
Keeping an eye on the water junctions in your bathroom is something you will definitely want to do to protect the investment that is your bathroom. These junctions are the shower, bath tub, sink, and the toilet.
The steam that comes off of the bath tub and shower can cause damage to the upper walls and ceiling, so installing an exhaust fan to get rid of this excess moisture buildup is a pretty good idea. Any room in your home that has moisture buildup like this should have an exhaust vent so the vapor does not become absorbed by the ceiling.
Tile that has missing grout or tile that is cracked should be replaced as soon as possible, because this allows water underneath it and will cause damage to the floor boards. This can eventually become so bad that the floor underneath has to be replaced, so replacing a few individual tiles or filling in missing areas of grout is much easier than doing that level of repair.
Look for signs of moisture on the walls of your bathroom, since this could mean that there is a leak in the plumbing in the wall.
Even though you may not see these every day, keep a watch on the plumbing that is underneath your bathroom sink. Having leaks in these pipes can cause the bottom of a vanity to rot and need replacing or if the pipes are not hidden by a cabinet, you will have visible standing water on the bathroom floor.
You should also do what you can to make sure that the toilet does not get stopped up with excess toilet paper, feminine napkins, or other things that do not belong there. Toddlers are notorious for putting items in the toilet like toy cars, so purchasing a lid lock may be a good idea if you have any of these in your home on a regular basis.
Keeping an eye on the water junctions in your bathroom is something you will definitely want to do to protect the investment that is your bathroom. These junctions are the shower, bath tub, sink, and the toilet.
The steam that comes off of the bath tub and shower can cause damage to the upper walls and ceiling, so installing an exhaust fan to get rid of this excess moisture buildup is a pretty good idea. Any room in your home that has moisture buildup like this should have an exhaust vent so the vapor does not become absorbed by the ceiling.
Tile that has missing grout or tile that is cracked should be replaced as soon as possible, because this allows water underneath it and will cause damage to the floor boards. This can eventually become so bad that the floor underneath has to be replaced, so replacing a few individual tiles or filling in missing areas of grout is much easier than doing that level of repair.
Look for signs of moisture on the walls of your bathroom, since this could mean that there is a leak in the plumbing in the wall.
Even though you may not see these every day, keep a watch on the plumbing that is underneath your bathroom sink. Having leaks in these pipes can cause the bottom of a vanity to rot and need replacing or if the pipes are not hidden by a cabinet, you will have visible standing water on the bathroom floor.
You should also do what you can to make sure that the toilet does not get stopped up with excess toilet paper, feminine napkins, or other things that do not belong there. Toddlers are notorious for putting items in the toilet like toy cars, so purchasing a lid lock may be a good idea if you have any of these in your home on a regular basis.
Standing Water in the Yard
The only thing more unsightly than a yard with no grass is a yard that is covered in patches of standing water. Having standing water in your yard or around the foundation of your home can be a pretty aggravating thing, but there is something that you can do to remedy this situation and will probably not cost you an arm and a leg.
Most of the time, problems with standing water in the yard can be attributed to the yard having uneven elevation all over it. Some parts may be lower than others and will retain water after a heavy or even sometimes a light rain. The simple solution to this is to fill in these lower areas with soil and plant grass over them to hold the new soil in place. Planting grass over it is not only necessary to look good, but also serves the practical purpose of making sure the soil does not just wash away over time.
The other option is to have a drainage system installed in the yard. Call your local building commission first and make sure that you have permission to take on such a project, even if you do own your house and the land it is on. Obtaining a building permit may not be easy and it might take you a few weeks to get one, but it just depends on where you are living at the time.
Dig a ditch in your yard starting at the point you want to drain water from and end the ditch where you want the excess water to be deposited. Slant this ditch downhill about 6 inches for every 100 feet so that water does not simply collect in the pipe and stand there. Lay a small amount of gravel throughout the length of this ditch and put a PVC pipe over it. Cover this with more gravel and cover it again with soil. The gravel will help direct ground water toward the drain’s end. Put some wire mesh or a sink strainer over the highest end of the pipe to keep debris from getting into it. You do not need a strainer at the other end.
If you have somewhat of a sense of humor and like the idea of a small pond in your yard, consider putting a goldfish pond in one of the spots where water likes to collect. Digging it out and keeping it aerated for some fish might add a pleasing effect as long as it is located in the right place.
Most of the time, problems with standing water in the yard can be attributed to the yard having uneven elevation all over it. Some parts may be lower than others and will retain water after a heavy or even sometimes a light rain. The simple solution to this is to fill in these lower areas with soil and plant grass over them to hold the new soil in place. Planting grass over it is not only necessary to look good, but also serves the practical purpose of making sure the soil does not just wash away over time.
The other option is to have a drainage system installed in the yard. Call your local building commission first and make sure that you have permission to take on such a project, even if you do own your house and the land it is on. Obtaining a building permit may not be easy and it might take you a few weeks to get one, but it just depends on where you are living at the time.
Dig a ditch in your yard starting at the point you want to drain water from and end the ditch where you want the excess water to be deposited. Slant this ditch downhill about 6 inches for every 100 feet so that water does not simply collect in the pipe and stand there. Lay a small amount of gravel throughout the length of this ditch and put a PVC pipe over it. Cover this with more gravel and cover it again with soil. The gravel will help direct ground water toward the drain’s end. Put some wire mesh or a sink strainer over the highest end of the pipe to keep debris from getting into it. You do not need a strainer at the other end.
If you have somewhat of a sense of humor and like the idea of a small pond in your yard, consider putting a goldfish pond in one of the spots where water likes to collect. Digging it out and keeping it aerated for some fish might add a pleasing effect as long as it is located in the right place.
Sanitizing Your Well Water
If you live outside the city limits, you may be among the thousands of people that have to rely on well water to drink and to bathe in. There are filters that can be put on your well to get rid of any mineral deposits, rust, or soil that may get into your water, but actually disinfecting your water if it is contaminated with bacteria is a somewhat different matter. You can clean your well water out by chlorinating it and this process is fairly simple.
Chlorinating well water is usually done to get rid of bacteria, to disinfect after you make some kind of repair to it, to disinfect after it has not been used in a while, such as the well of a vacation home, or the removal of hydrogen sulphide.
The first thing that you need to do is to get enough water saved up in your house by using milk jugs or whatever else you have to put water in to last your home’s needs for at least the next 24 hours.
Depending on how deep your well is, you will want to put a different amount of bleach into the water. The bleach that you will want to use is a simple, unscented household bleach. This should contain about 3 to 5 percent sodium chlorite. As far as just how much bleach you need to use, it varies. If your well is less than 50 feet deep and is 6 inches in diameter, you will want to use 3.5 liters of bleach in it. A well that is 100 feet deep and 6 inches in diameter will require 7.
You should not use the water system of your home for at least 8 hours after doing this. 24 hours is usually the recommended time, but this might not be practical for you if you have a large family.
By the time the process is over, your water should not smell like chlorine. The water may look similar to a tea color, but this will go away after a bit of use. Do not drink the water until the chlorine smell is gone.
If the process helps your water’s quality, but the problem comes back in a few weeks, you will need to repeat this process and possibly add more bleach per application. This should result in a water supply quality that is much better than it was before.
Chlorinating well water is usually done to get rid of bacteria, to disinfect after you make some kind of repair to it, to disinfect after it has not been used in a while, such as the well of a vacation home, or the removal of hydrogen sulphide.
The first thing that you need to do is to get enough water saved up in your house by using milk jugs or whatever else you have to put water in to last your home’s needs for at least the next 24 hours.
Depending on how deep your well is, you will want to put a different amount of bleach into the water. The bleach that you will want to use is a simple, unscented household bleach. This should contain about 3 to 5 percent sodium chlorite. As far as just how much bleach you need to use, it varies. If your well is less than 50 feet deep and is 6 inches in diameter, you will want to use 3.5 liters of bleach in it. A well that is 100 feet deep and 6 inches in diameter will require 7.
You should not use the water system of your home for at least 8 hours after doing this. 24 hours is usually the recommended time, but this might not be practical for you if you have a large family.
By the time the process is over, your water should not smell like chlorine. The water may look similar to a tea color, but this will go away after a bit of use. Do not drink the water until the chlorine smell is gone.
If the process helps your water’s quality, but the problem comes back in a few weeks, you will need to repeat this process and possibly add more bleach per application. This should result in a water supply quality that is much better than it was before.
Mold and Your Children
The health of children is probably the most important issue for the majority of parents across the nation and as time goes on, we are seeing more and more potential threats to it. Whether it is asthma, the flu, bronchitis, or any other type of illness, all parents are concerned with the long term effects of these conditions and what causes or aggravates them.
Mold has somewhat taken center stage in the list of things in your home that can cause adverse health effects for not only children and the elderly, but anyone else living in your home at the time, as well. Not only can mold cause the aggravation of allergies and respiratory conditions such as asthma and emphysema, but it can also be toxic and cause long term medical conditions that can even end in death in some severe cases.
Due to their underdeveloped nature compared to adults, children are much more at risk to face the health effects of mold exposure than their adult counterparts. If your child has allergies, you probably keep an eye on their exposure to them on a daily basis, as well you should, but have you had your home tested for mold? If you have not, then you probably should.
Your child’s immune system is in development in the early years of its life and you should do what you can to make sure that the natural maturing process is not disturbed. Educate yourself about the different symptoms that can be caused from mold exposure, since many doctors are not particularly aware of the complex symptoms that can come about from the exposure. If you believe that your home has mold and your child is sick, relate this to your child’s pediatrician.
Infants are the most at risk, obviously, and if you suspect there is mold in your home anywhere, you should remove the child from the environment immediately and have tests done to determine if the mold is cosmetic or not. Hemorrhagic pneumonia can be caused by mold exposure in an infant and deaths have been reported.
If your home has been flooded and your child’s toys were exposed to flood waters, anything porous needs to be thrown away. This includes stuffed animals, pillows, and other bedding. These are no longer safe for your child to play with. Even mattresses need to be thrown out and replaced, because of the recent link between mold, crib mattresses, and Sudden Infant Death Syndrome.
Mold has somewhat taken center stage in the list of things in your home that can cause adverse health effects for not only children and the elderly, but anyone else living in your home at the time, as well. Not only can mold cause the aggravation of allergies and respiratory conditions such as asthma and emphysema, but it can also be toxic and cause long term medical conditions that can even end in death in some severe cases.
Due to their underdeveloped nature compared to adults, children are much more at risk to face the health effects of mold exposure than their adult counterparts. If your child has allergies, you probably keep an eye on their exposure to them on a daily basis, as well you should, but have you had your home tested for mold? If you have not, then you probably should.
Your child’s immune system is in development in the early years of its life and you should do what you can to make sure that the natural maturing process is not disturbed. Educate yourself about the different symptoms that can be caused from mold exposure, since many doctors are not particularly aware of the complex symptoms that can come about from the exposure. If you believe that your home has mold and your child is sick, relate this to your child’s pediatrician.
Infants are the most at risk, obviously, and if you suspect there is mold in your home anywhere, you should remove the child from the environment immediately and have tests done to determine if the mold is cosmetic or not. Hemorrhagic pneumonia can be caused by mold exposure in an infant and deaths have been reported.
If your home has been flooded and your child’s toys were exposed to flood waters, anything porous needs to be thrown away. This includes stuffed animals, pillows, and other bedding. These are no longer safe for your child to play with. Even mattresses need to be thrown out and replaced, because of the recent link between mold, crib mattresses, and Sudden Infant Death Syndrome.
Invest in a Water and Fireproof Safe
We all have valuables that we need to have protected, whether it is from a burglar, nosy child, fire, or floods. Documents, jewelry, or anything else that may be valuable to you can be put inside and safe and be almost completely protected from anything that might have happened to them outside of it. Making an investment in a safe can possibly save you thousands of dollars, simply depending on what you choose to keep inside it.
Depending on your situation, there are a few different kinds of safes that you can consider. Do you need a waterproof safe because you live in an area prone to floods or hurricanes? Or an area prone to wildfires? Or do you want a combination of the two? Both kinds of protection are good to have, since water damaged documents can be a hassle to deal with and a fire can do away with them completely.
Safes that are fireproof have the feature of having a positive pressure inside them that will keep water from getting inside, but unfortunately if there is not a fire present to create this pressure, water can get inside these and cause damage to your items. If possible, try to purchase a safe that is both waterproof and fireproof.
There is also the choice of where you want your safe to be located. Portable safes are good if you do a lot of traveling and want a thief to have a hard time getting to your valuables, even if they can pick it up and take it out of your room. It will take them a while to get your belongings out of the safe, to be sure, and it is very possible that the police will catch them before they have a chance.
A floor safe is just what the name implies: a safe that you install directly into the floor. You can cover this with a rug or a piece of furniture to make sure that no one sees it. A safe installed into the floor should be waterproof, since the floor is the first thing that flood waters will reach.
A wall safe offers the same kind of concealment that a floor safe offers and you can cover these with tapestries, mirrors, or photographs. Make sure you choose the correct depth for it, however, so you get the right one for your wall.
Depending on your situation, there are a few different kinds of safes that you can consider. Do you need a waterproof safe because you live in an area prone to floods or hurricanes? Or an area prone to wildfires? Or do you want a combination of the two? Both kinds of protection are good to have, since water damaged documents can be a hassle to deal with and a fire can do away with them completely.
Safes that are fireproof have the feature of having a positive pressure inside them that will keep water from getting inside, but unfortunately if there is not a fire present to create this pressure, water can get inside these and cause damage to your items. If possible, try to purchase a safe that is both waterproof and fireproof.
There is also the choice of where you want your safe to be located. Portable safes are good if you do a lot of traveling and want a thief to have a hard time getting to your valuables, even if they can pick it up and take it out of your room. It will take them a while to get your belongings out of the safe, to be sure, and it is very possible that the police will catch them before they have a chance.
A floor safe is just what the name implies: a safe that you install directly into the floor. You can cover this with a rug or a piece of furniture to make sure that no one sees it. A safe installed into the floor should be waterproof, since the floor is the first thing that flood waters will reach.
A wall safe offers the same kind of concealment that a floor safe offers and you can cover these with tapestries, mirrors, or photographs. Make sure you choose the correct depth for it, however, so you get the right one for your wall.
Info on Mold Allergies
There are people who have allergies all over the world and no matter what the allergy may be, anyone with one will tell you just how much of an inconvenience it tends to be. Symptoms usually show themselves the most often during the early spring through the late fall, whether it is an allergy to grass, pollen, or mold. Pet dander can be a problem with some individuals and this is one of the only allergies that is really only an inconvenience year round. Molds living in your home can also aggravate your allergies and even bring about new ones and are also one of the only allergies that are a threat the whole year, since molds that live indoors do not freeze like those outside.
A high mold spore level in your home can do a lot to aggravate your already existing allergies and can even cause an allergy to the specific kind of mold living in your home to develop. The symptoms from mold exposure can range from a common episode of sneezing or a runny nose all the way to a reaction that requires an ambulance. Children and elderly people in particular need to pay careful attention to the level of their allergen that they expose themselves to every day. Watch the news for each of the pollen, mold spore, and grass counts. If the counts are high for that day, consider not letting children or elderly people with allergies or respiratory conditions go out that day.
If you have mold allergies and think you are having symptoms, you should avoid eating foods that contain mold, such as cheeses that are made with it, bread, beer, and even other funguses like mushrooms. All of these can make your symptoms even worse.
Most types of mold in the world are not harmful to human beings and while there are a few different ones that can cause serious medical conditions, only a few tend to cause allergic reactions immediately. The most common molds that produce allergic reactions are those in the Penicillium, Alternaria, and Clasosporium genii.
If you are concerned about mold living in your home, you should do your best to reduce the humidity level in it. Keeping your home bone dry is not practical, since air that is too dry can also cause problems like nosebleeds, but keeping it at a healthy medium is best for all. A home that is too moist inside is a breeding ground for mold.
A high mold spore level in your home can do a lot to aggravate your already existing allergies and can even cause an allergy to the specific kind of mold living in your home to develop. The symptoms from mold exposure can range from a common episode of sneezing or a runny nose all the way to a reaction that requires an ambulance. Children and elderly people in particular need to pay careful attention to the level of their allergen that they expose themselves to every day. Watch the news for each of the pollen, mold spore, and grass counts. If the counts are high for that day, consider not letting children or elderly people with allergies or respiratory conditions go out that day.
If you have mold allergies and think you are having symptoms, you should avoid eating foods that contain mold, such as cheeses that are made with it, bread, beer, and even other funguses like mushrooms. All of these can make your symptoms even worse.
Most types of mold in the world are not harmful to human beings and while there are a few different ones that can cause serious medical conditions, only a few tend to cause allergic reactions immediately. The most common molds that produce allergic reactions are those in the Penicillium, Alternaria, and Clasosporium genii.
If you are concerned about mold living in your home, you should do your best to reduce the humidity level in it. Keeping your home bone dry is not practical, since air that is too dry can also cause problems like nosebleeds, but keeping it at a healthy medium is best for all. A home that is too moist inside is a breeding ground for mold.
Child Mold Exposure
When you have children, you realize that the most important thing to you at that point is making sure that they stay healthy and that if there is anything that you can do to improve the quality of their health, you make sure that you do that. No matter what happens, your foremost concern is their health and welfare.
Having mold growing in your home is a pretty heavy inconvenience for any homeowner, but for parents of small children, it can be a nightmare. The health of small children is very fragile at that point of their lives and most parents understand this, but do not tend to realize just how serious of a threat to their health can exist inside their own homes. We tend to be the most concerned with the threats that come from outside our homes, but one of the most serious threats can be growing almost anywhere.
The areas of our homes that are the most moist also tend to be the ones that we frequent the most, such as the bathroom and the kitchen, and unfortunately, these are the two areas of the home that are the most at risk for mold growth. The food that your children eat is not the only thing in your home that can become moldy. The ceilings, floors, and walls can become just as moldy as a stale loaf of bread, but you may not notice it until it is too late. Symptoms of mold exposure often show themselves in those members of our households that are the most sensitive to environmental changes, such as children, pets, and elderly people.
Symptoms of mold exposure are very similar to the symptoms of most allergies that involve pollen, grass, or pet dander and can include sneezing, runny noses, blocked noses, eye irritation, itchy skin, and etcetera. Infants are in the most danger and if you discover mold growing anywhere in the house, your baby needs to be taken to a clean environment quickly and needs to stay there until the contamination is removed. Infants are susceptible to developing hemorrhagic pneumonia from mold exposure among other conditions, so it should be taken very seriously. Even if the mold growth is old and dead, it can still cause allergy symptoms, reactions, and can aggravate any pre-existing respiratory conditions that may exist in your home.
To keep your children healthy, do not allow them to stay in a home that is contaminated with mold and any items in your home that are found to be molded, especially toys, should be thrown away. Porous items like stuffed animals and bedding need to be thrown away, since it is difficult to completely disinfect these items and small children often put these things in their mouths.
Having mold growing in your home is a pretty heavy inconvenience for any homeowner, but for parents of small children, it can be a nightmare. The health of small children is very fragile at that point of their lives and most parents understand this, but do not tend to realize just how serious of a threat to their health can exist inside their own homes. We tend to be the most concerned with the threats that come from outside our homes, but one of the most serious threats can be growing almost anywhere.
The areas of our homes that are the most moist also tend to be the ones that we frequent the most, such as the bathroom and the kitchen, and unfortunately, these are the two areas of the home that are the most at risk for mold growth. The food that your children eat is not the only thing in your home that can become moldy. The ceilings, floors, and walls can become just as moldy as a stale loaf of bread, but you may not notice it until it is too late. Symptoms of mold exposure often show themselves in those members of our households that are the most sensitive to environmental changes, such as children, pets, and elderly people.
Symptoms of mold exposure are very similar to the symptoms of most allergies that involve pollen, grass, or pet dander and can include sneezing, runny noses, blocked noses, eye irritation, itchy skin, and etcetera. Infants are in the most danger and if you discover mold growing anywhere in the house, your baby needs to be taken to a clean environment quickly and needs to stay there until the contamination is removed. Infants are susceptible to developing hemorrhagic pneumonia from mold exposure among other conditions, so it should be taken very seriously. Even if the mold growth is old and dead, it can still cause allergy symptoms, reactions, and can aggravate any pre-existing respiratory conditions that may exist in your home.
To keep your children healthy, do not allow them to stay in a home that is contaminated with mold and any items in your home that are found to be molded, especially toys, should be thrown away. Porous items like stuffed animals and bedding need to be thrown away, since it is difficult to completely disinfect these items and small children often put these things in their mouths.
Child Mold Exposure Symptoms
If your home contains almost any kind of mold, your children and pets are probably going to be the first ones that show symptoms, especially if they have any allergies or respiratory conditions like asthma or become sick easily. If you notice your child having any trouble with his or her respiratory system and cannot seem to find the cause, checking your household for mold growth might be a good idea.
The symptoms of mold exposure are typically very similar to allergy symptoms, so you may initially mistake them for the symptoms of the child’s allergies. Your child’s pediatrician may claim that it is just seasonal allergies, but in reality, it may be your home that has the issue. Persistent respiratory symptoms like sneezing, hoarseness, rhinitis, eye irritation, and blocked noses can occur as well as dry coughing, productive coughing, and sometimes wheezing. Skin symptoms such as itching and redness also tend to arise in certain uncovered areas of the body, which suggests that the child has touched the growth.
Other symptoms like fever, joint pain, headaches, and excessive tiredness have also been reported. Your child also may show an intolerance to certain foods like mushrooms, bread, and cheeses, while older members of your household may show intolerance to things like wine and beer. Children that are in high-exposure mold conditions such as where the toxic mold Stachybotrys are concerned can exhibit things such as hemoptysis and nose bleeds.
Children in homes containing mold may also show more intolerance to things like cigarette smoke or household chemicals that emit vapors into the air.
If your child does not have any known allergies and they are showing these symptoms with no readily apparent cause, have your home tested for mold by hiring a professional or performing a do it yourself test.
If your home does have mold growth, your child needs to be removed from the area as soon as possible and relocated until the growth is removed. You should realize that even dead mold growth can cause allergic reactions and that until it is removed, your child’s health is at significant risk.
Any items in your home that have become moldy, especially if it is children’s toys such as stuffed animals or bedding, will need to be thrown away. Do not allow children to play with items that have been exposed to flood waters or mold growth.
The symptoms of mold exposure are typically very similar to allergy symptoms, so you may initially mistake them for the symptoms of the child’s allergies. Your child’s pediatrician may claim that it is just seasonal allergies, but in reality, it may be your home that has the issue. Persistent respiratory symptoms like sneezing, hoarseness, rhinitis, eye irritation, and blocked noses can occur as well as dry coughing, productive coughing, and sometimes wheezing. Skin symptoms such as itching and redness also tend to arise in certain uncovered areas of the body, which suggests that the child has touched the growth.
Other symptoms like fever, joint pain, headaches, and excessive tiredness have also been reported. Your child also may show an intolerance to certain foods like mushrooms, bread, and cheeses, while older members of your household may show intolerance to things like wine and beer. Children that are in high-exposure mold conditions such as where the toxic mold Stachybotrys are concerned can exhibit things such as hemoptysis and nose bleeds.
Children in homes containing mold may also show more intolerance to things like cigarette smoke or household chemicals that emit vapors into the air.
If your child does not have any known allergies and they are showing these symptoms with no readily apparent cause, have your home tested for mold by hiring a professional or performing a do it yourself test.
If your home does have mold growth, your child needs to be removed from the area as soon as possible and relocated until the growth is removed. You should realize that even dead mold growth can cause allergic reactions and that until it is removed, your child’s health is at significant risk.
Any items in your home that have become moldy, especially if it is children’s toys such as stuffed animals or bedding, will need to be thrown away. Do not allow children to play with items that have been exposed to flood waters or mold growth.
Child Mold Allergy Problems
Allergies are an inconvenience for everyone who has them and there are billions of people in the world who suffer from them every day. Whether it is an allergy to pollen, grass, pet dander, or mold, the symptoms are usually about the same. They can be anything from a runny nose and a pair of itchy eyes all the way to swelling of the face and neck or even the entire body. Most allergy symptoms are only prevalent from the spring to fall, but allergies that are caused by things like pet dander and mold show themselves the whole year because they are not related to the outdoor growing season.
Mold living in your home does not freeze and lie dormant like it does in the outdoor environment and can pose a serious health risk for anyone, not just those members of your household that have allergies. People that have allergies, however, are more likely to feel the affects of mold exposure sooner than the rest of us. Mold exposure tends to aggravate allergies and respiratory conditions that already exist, like emphysema or asthma. You need to be particularly careful if you have an infant or a small child in your house when there is mold, since their immune systems are currently still very much in development. Disturbing this natural development process can damage the child’s immune system irreparably, so removing your child from this situation until the mold is removed is the best thing to do.
Infants exposed to mold have been known to develop a disease known as hemorrhagic pneumonia (bleeding in the lungs) and many times this ends in death.
Those who have allergies and are exposed to mold growth in the home or elsewhere will usually show an intolerance to certain foods that contain fungi, such as yeast, mushrooms, or mold. Cheeses such as blue cheese or Roquefort, bread, beer, mushrooms, and etcetera will typically make the normal allergy symptoms of the person even worse.
Note if the symptoms lessen or go away completely if you leave the home. This will be a sign that there is a problem in the home that is causing the symptoms to become worse and you may need to call a professional mold inspector if there is no visible mold issue.
Coming into direct skin contact with the mold will often leave rashes on even those who are not allergic. Take a good look around your house, especially in areas that are inherently moist like the bathroom, kitchen, basement, or laundry room. These are the areas that are most likely to harbor mold growth in your home.
Mold living in your home does not freeze and lie dormant like it does in the outdoor environment and can pose a serious health risk for anyone, not just those members of your household that have allergies. People that have allergies, however, are more likely to feel the affects of mold exposure sooner than the rest of us. Mold exposure tends to aggravate allergies and respiratory conditions that already exist, like emphysema or asthma. You need to be particularly careful if you have an infant or a small child in your house when there is mold, since their immune systems are currently still very much in development. Disturbing this natural development process can damage the child’s immune system irreparably, so removing your child from this situation until the mold is removed is the best thing to do.
Infants exposed to mold have been known to develop a disease known as hemorrhagic pneumonia (bleeding in the lungs) and many times this ends in death.
Those who have allergies and are exposed to mold growth in the home or elsewhere will usually show an intolerance to certain foods that contain fungi, such as yeast, mushrooms, or mold. Cheeses such as blue cheese or Roquefort, bread, beer, mushrooms, and etcetera will typically make the normal allergy symptoms of the person even worse.
Note if the symptoms lessen or go away completely if you leave the home. This will be a sign that there is a problem in the home that is causing the symptoms to become worse and you may need to call a professional mold inspector if there is no visible mold issue.
Coming into direct skin contact with the mold will often leave rashes on even those who are not allergic. Take a good look around your house, especially in areas that are inherently moist like the bathroom, kitchen, basement, or laundry room. These are the areas that are most likely to harbor mold growth in your home.
Friday, January 18, 2008
Easy Ways To Prevent House Fires
House fires claim lives and destroy property all across the globe, but you and your home do not have to be a victim. As long as you follow a set of guidelines that have been developed to protect you and your family, the chance that your home will catch on fire will be greatly reduced. Make sure the rest of your household knows these new rules and that you plan on having them follow them to the letter, though, or the effort will be wasted.
One of the most important things is to realize that most house fires start in the kitchen. These usually start due to human error or negligence, but mostly it is because items are left unattended on the stove. This is something that you should never do. Do not allow yourself to become occupied with other events in your home such as fighting children, the telephone, or family members wanting you in another room. If you want to watch something on TV while you are cooking, have a small television installed in the kitchen, perhaps under one of the upper cabinets. Give yourself every reason to stay in the kitchen.
You should also not ever try to open your stove’s oven door while it is cleaning itself. Most ovens lock shut while they are cleaning themselves and you should not try to force this door open due to the amount of heat inside. This is a hotter temperature than it will allow you to cook things at.
If you ever have to clean anything with gas or turpentine, do it outside away from your house due to the fumes. The fumes are heavier than air and settle around the floor, making any spark from a wall outlet a serious threat. These and other materials marked as highly flammable should be stored outside the home and away from it, in a shed of some kind if possible.
Your electrical outlets should never be overloaded with accessories that create extra outlets or extension cords. Extension cords, when you do have to use them, should not be used with devices that are created to emit a large amount of heat, such as space heaters or items that you cook with, such as electric skillets. These will melt most household extension cords, so a more heavy duty variety should be used. Never run extension cords under rugs or carpet.
The batteries in your smoke detectors need to be changed at least once a year. Test your smoke detector every few months to make sure that it is working correctly and having one that also detects carbon monoxide is an added bonus, since this is a silent, invisible killer that is more common than you may realize.
One of the most important things is to realize that most house fires start in the kitchen. These usually start due to human error or negligence, but mostly it is because items are left unattended on the stove. This is something that you should never do. Do not allow yourself to become occupied with other events in your home such as fighting children, the telephone, or family members wanting you in another room. If you want to watch something on TV while you are cooking, have a small television installed in the kitchen, perhaps under one of the upper cabinets. Give yourself every reason to stay in the kitchen.
You should also not ever try to open your stove’s oven door while it is cleaning itself. Most ovens lock shut while they are cleaning themselves and you should not try to force this door open due to the amount of heat inside. This is a hotter temperature than it will allow you to cook things at.
If you ever have to clean anything with gas or turpentine, do it outside away from your house due to the fumes. The fumes are heavier than air and settle around the floor, making any spark from a wall outlet a serious threat. These and other materials marked as highly flammable should be stored outside the home and away from it, in a shed of some kind if possible.
Your electrical outlets should never be overloaded with accessories that create extra outlets or extension cords. Extension cords, when you do have to use them, should not be used with devices that are created to emit a large amount of heat, such as space heaters or items that you cook with, such as electric skillets. These will melt most household extension cords, so a more heavy duty variety should be used. Never run extension cords under rugs or carpet.
The batteries in your smoke detectors need to be changed at least once a year. Test your smoke detector every few months to make sure that it is working correctly and having one that also detects carbon monoxide is an added bonus, since this is a silent, invisible killer that is more common than you may realize.
Water Damaged Clothing Cleaning Methods
One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
Water Damaged Clothing Cleaning Methods
One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature.
Venting Is A Good Thing To Keep Mold At Bay
If you do not have a ceiling exhaust fan installed in your bathrooms, it will not be long before you realize why you need one. There are so many reasons that they are a necessary item. Have you ever tried to blow dry your hair in a steamy bathroom? If you could see yourself in the mirror it might help, but with all that moisture in the air it’s not likely. Then there are also those unspeakable bathroom odors that almost anyone would rather not speak of, but they go along with the natural procession of things and the exhaust fan is a marvelous invention, if only to dispel an unpleasantness that remains even after its last occupant is gone!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
Replacing Molded, Wet Carpet
For a homeowner there is nothing more unsightly then mold. Even worse, still, is mold growing on your carpet. The first thing one usually decides to do upon discovering mold is to have it thoroughly cleaned. However, this can be far more difficult than it actually sounds. One of the biggest problems you can face may be that the mold isn’t simply on your carpet. It may also be on the padding beneath the carpet, and this could just cause even more damage than the original carpet. And if this is the case, the whole carpet should be removed. The padding should also be removed and thrown away.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Protecting Your Personal Property From Mold
It is well known that there is no such thing as a “mold free” environment. It is in the air we breathe, on our furniture, on our clothes, and definitely in our homes. It is simply a matter of whether or not the mold actually starts to grow on our property that determines if there is a problem. Mold likes to grow in wet environments, so wet kitchen floors are potential breeding grounds, as well as un-dried dishes in your kitchen.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Moldy Fabric Cleaning Methods Revealed
There is hardly a person in the world that hasn’t gone through their wardrobe and discovered that one favorite shirt of theirs from their younger days. And then the moment is ruined upon the discovery of a fuzzy substance on the shirt. If you found this shirt in the back of your closet, then you should go wash your hands, because the shirt has been infected with mold and touching mold spores with your bare hands can be very hazardous for your health. There are several medical problems that could arise from contact with mold. Some of these problems are skin rashes, allergic reactions, runny noses, and the like.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Mold Can Destroy Citrus Crops Quickly
Anyone who works with citrus crops knows that they can take a very long time to grow and cultivate. But, perhaps even more frustrating than waiting on the crops to have to grow and ripen are the various molds and fungi that could afflict the crops. The two most prominent molds that affect a citrus crop post-harvest are blue mold, and green mold. These two are caused by the single mold Penicillium digitatum. All citrus fruit growing regions have this mold and it is most certainly a serious threat to the crops.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Citrus fruit is made into an easy target for mold by way of being bruised or by being punctured while it is being packed or harvested. The mold is attracted to the juice that comes out of the damaged fruit on account of the fact that mold likes to grow in wet and humid environments. And since most citrus is grown in temperate zones, there is no lack of these two qualities. If the fruit is in, say, a large shipping truck with a lot of other fruits, the mold could spread far into the shipment and cause a good portion of it to be riddled with mold infection. And if the mold makes to the grocery store and the mold, by some miracle, goes unnoticed it could affect other items in the store. If the fruit is left on the tree and mold has spread to it then other fruit on the tree could be affected and the crop could be rendered useless.
The only actual difference between blue mold and green mold is color. There are virtually no differences in the effects the two molds have on fruit. The two molds also have very similar growing environments and necessities and have basically the same needs. They must both grow in a temperature of around seventy five degrees Fahrenheit. Raising or lowering the temperature can slow the growth of these molds. As such, freezing the citrus fruits can stop the molds growth before any serious damage can be done. This is why most shipment trucks are equipped with a freezer, but many still do not have this feature. Taking extra care of the citrus fruits is another way to prevent the spread of mold. Caring for the fruit helps to ensure that there is no puncturing or bruising. Fungicides are also a very popular, and a highly recommended, way of dealing with mold.
Hurricanes And Water Safety Made Simple And Easy
If there is a hurricane heading to your area, then it is most important that you make preparations, incase you decide to simply wait the hurricane out. Arguably the most important thing that you can do is to make sure that you have a sizeable bottled water supply in your home. It is important that you make sure that the water supply is proportionate to the number of people dwelling at your house, as there must be enough water for the duration of the storm. It is critical that you have clean drinking water during the storm. The water from the sea and sewer system may have affected the water in your tap, so you should never assume that the water coming out of your faucet is clean. You should not drink anything but bottled water during a hurricane. This contaminated water could sicken your family or guests and even cause death in the worst case. You should make sure that there is at least one gallon of water for one person to drink a day. Water purification tablets and chlorinated bleach come highly recommended, as they can be used to clean water in most situations. It is important that you let the treated water set for at least 30 minutes before you drink it.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
It is important that you, under no circumstances whatsoever, do not drink water that may be contaminated. Damage to your body caused by contaminated water is devastating and if you have drank any contaminated water and are afflicted with the symptoms of it, it is very unlikely that you will be able to make it to a hospital during the hurricane and death could very well result. If you receive any cuts or wounds, do not try and wash it off with faucet water. This could make the contamination’s job that much easier. You should instead wash the cut or cuts with soap and chlorine bleach treated water. This will help keep serious harm from happening.
You should at no point allow children to play in flood waters, no matter how hot it may get in your building. If there are toys that have come into contact with water that you so much as suspect as being contaminated, you should have the toys disinfected before allowing the children to play with them again. You should also board up your windows and doors with plywood, as it keeps glass from being blown into your home and causing cuts.
Subscribe to:
Posts (Atom)
